Telephone: 01985 988082

Canems Fully Sequential Programmable ECU

New Canems Fully Sequential ECU, 2m pigtail loom with 55-pin Motronic connector, USB adaptor, RS232 programming cable and software for fully mappable fuel and ignition. Can be used with practically all petrol engines.

This kit includes:

  • Canems ECU - complete with base map for your engine;
  • Canems ECU 55-pin Motronic connector pre-connected to 2 metres of colour coded thin wall cable;
  • USB Adaptor Cable;
  • RS232 Programming Cable;
  • Software CD;
  • Instruction Manual.


  • Semi-Sequential Fuel Injection for up to 16 cylinders or Fully-Sequential Fuel Injection for up to 8 Cylinders;
  • Wasted Spark Ignition for up to 16 Cylinders or Direct (coil-on-plug) Ignition for up to 8 cylinders;
  • 2 Wide-band or Narrow-band Lambda Inputs - with Closed Loop Control and 3D Target Air-Fuel Ratio map;
  • Two Switchable 3D Fuel Injection Maps with 252 programmable sites;
  • Two Switchable 3D Ignition Timing Maps with 252 programmable sites;
  • Built-in Coil Control (no external modules required - e.g.: EDIS);
  • 3D Injection Advance Map with 252 programmable sites;
  • 12000rpm capability;
  • Programmable Hard and Soft Rev Limiters;
  • Programmable Shift Light output, Cooling Fan control, etc;
  • Programmable Correction Maps for Coolant Temperature, Air Temperature and Cranking;
  • Programmable Transient Enrichments;
  • Staged Injector Control;
  • 3D PWM Output - with 252 programmable sites - ideal for open-loop Boost Control;
  • PWM valve, Stepper Motor (bi-polar) and/or Spark Scatter Idle control;
  • Closed Loop Idle control;
  • All settings Real-Time Programmable;
  • Adjustable Coil Dwell Control;
  • MAP or TPS based Load Sensors can be utilised;
  • RPM input from either VR or Hall Effect Sensor with 36-1 or 60-2 toothed wheel - please state when ordering;
  • Data-logging of up to 24 optional parameters, with adjustable recording rate and 2GB internal memory;
  • Immobilisor input;
  • Diagnostic Recording of Max. / Min. Inputs and Outputs.

The main benefits of purchasing this ECU:

  1. Full technical support available via telephone and e-mail;
  2. Increased performance;
  3. Increased part throttle economy;
  4. Greatly improved drive-ability - better throttle response, smoother running, etc;
  5. Improved reliability;
  6. Future-proof - internal hardware present for 4-wheel traction control, 2 knock sensors, fly-by-wire throttle, Canbus, etc;
  7. Switchable maps - ideal for LPG conversions.

Custom Engine Management Wiring Looms are available to order, please contact us for details.

Installation and rolling road mapping services are available at competitive prices, please contact us with your requirements.

Note: Free Delivery on all engine management products! (applies to UK mainland only)

Canems Fully Sequential Programmable ECU

£795 Ex VAT