Fully Programmable Engine Management Kit - Pre-Serpentine Rover V8

This is the complete kit to convert your Pre-Serpentine Rover V8 engine to a fully mappable fuelling and distributor-less (DIS) engine management system.

Whether it is a TVR or a Land-Rover, this kit includes everything you need for the conversion. The engine management controls both fuelling and ignition and comes pre-loaded with a base map to get your vehicle up and running straight after installation. Ideal for Rover V8 engines with LPG, bio-fuel, nitrous, turbochargers and superchargers.

This kit includes:

• Canems Engine Control Unit (ECU) - IP67 water-proof, complete with base map;
• ECU manual;
• Complete custom Rover V8 Engine Wiring Loom with ECU Multi-Plug - complete 3.2m loom with all required OEM grade weather-proof connectors fitted. All connectors and un-terminated cables are individually labelled for straight-forward installation. Individual fused main relay. OEM protective outer sheathing;
• 1-Bar MAP Sensor;
• Bosch 2-wire PWM Idle Valve - replaces OEM Idle Valve;
• Silicon Reducer Hoses - for Idle Valve;
• Stepper Motor Housing Blanking Plug;
• Silicon Vacuum Hose - 2m;
• 4mm T-Piece;
• 2 Ignition Coil Packs;
• Rover V8 Coil Pack Bracket;
• 8 HT Leads;
• 36-1 Trigger Wheel (4 or 6 bolt pulley mounted - please specify when ordering);
• VR Crank Sensor;
• Crank Sensor Bracket;
• Air Temperature Sensor;
• USB Programming Cable;
• RS232 Programming Cable;
• Software CD;
• Kit installation manual;
• 1 Year Parts Guarantee.
  

The main benefits of purchasing this kit:

1. Full technical support available via telephone and e-mail;
2. Ability to alter timing and fuel maps for any future modifications;
3. Increased performance - throughout the rev range;
4. Greatly increased part throttle economy;
5. Greatly improved drive-ability - better throttle response, smoother running, etc;
6. Improved reliability - inc. waterproof ignition capability;
7. Dual fuel / dual map capability;
8. Boost control for turbo-charged applications;
9. Increased LPG performance.

Made in England, the ECU is the latest development by CanEMS.

Features:

• Semi-Sequential Fuel Injection Control for 8 Cylinders;
• Wasted Spark Ignition for 8 Cylinders;
• 2 Wide-band or Narrow-band Lambda Inputs - with Closed Loop Control and 3D Target Air-Fuel Ratio map;
• Two Switchable 3D Fuel Injection Maps with 252 programmable sites;
• Two Switchable 3D Ignition Timing Maps with 252 programmable sites;
• Built-in Coil Control (no external modules required - e.g.: EDIS);
• 3D Injection Timing Map with 252 programmable sites;
• 12000rpm capability;
• Programmable Hard and Soft Rev Limiters;
• Programmable Shift Light output;
• Programmable Correction Maps for Coolant Temperature, Air Temperature and Cranking;
• Programmable Transient Enrichments;
• Staged Injector Control;
• 3D PWM Output - with 252 programmable sites - ideal for open-loop Boost Control;
• PWM valve and/or Spark Scatter Idle control;
• Closed Loop Idle control;
• All settings Real-Time Programmable;
• Adjustable Coil Dwell Control;
• MAP or TPS based Load Sensors can be utilised;
• RPM input from either VR or Hall Effect Sensor with 36-1 or 60-2 toothed wheel - please state when ordering;
• Data-logging of up to 24 optional parameters, with adjustable recording rate;
• Diagnostic Recording of Max. / Min. Inputs and Outputs;
• IP67 Waterproof ECU - ideal for off-roading.

The distributor-less ignition system provides waterproof ignition capability, particularly ideal for off-road applications.

Note that we also sell an Ignition Only Engine Management Kit for Rover V8's with carburettors, although this kit can also be used as an ignition-only kit.

Rover V8 Engine Management Kit, Installation, Set-up & Mapping - for Fuel-Injected, Naturally-aspirated Rover V8's - £1795

Rolling road mapping services are available at competitive prices for many applications, including forced induction and alternative fuels. Please contact us with your requirements.

'DIS Engine Management - Rover V8' - article

We usually have these engine management kits in stock, but please call to confirm before ordering.