Canems Fully Programmable Marine ECU

This kit includes:

• Canems Marine ECU – IP67 Water-proof;
• Canems ECU 30-pin Multi-Plug pre-connected to 2 metres of colour coded thin wall cable;
• USB Adaptor Cable;
• RS232 Programming Cable
• Software CD;
• Canems Injection Manual.

Features:

• Semi-Sequential Fuel Injection Control for up to 8 Cylinders;
• Wasted Spark Ignition for up to 8 Cylinders;
• 2 Wide-band or Narrow-band Lambda Inputs – with Closed Loop Control and 3D Target Air-Fuel Ratio map;
• Two Switchable 3D Fuel Injection Maps with 252 programmable sites;
• Two Switchable 3D Ignition Timing Maps with 252 programmable sites;
• Built-in Coil Control (no external modules required – e.g.: EDIS);
• 3D Injection Advance Map with 252 programmable sites;
• 12000rpm capability;
• Programmable Hard and Soft Rev Limiters;
• Programmable Shift Light output;
• Programmable Correction Maps for Coolant Temperature, Air Temperature and Cranking;
• Programmable Transient Enrichments;
• Staged Injector Control;
• 3D PWM Output – with 252 programmable sites – ideal for open-loop Boost Control;
• PWM valve and/or Spark Scatter Idle control;
• Closed Loop Idle control;
• All settings Real-Time Programmable;
• Adjustable Coil Dwell Control;
• MAP or TPS based Load Sensors can be utilised;
• RPM inout from either VR or Hall Effect Sensor with 36-1 or 60-2 toothed wheel – please state when ordering;
• Data-logging of up to 24 optional parameters, with adjustable recording rate;
• Diagnostic Recording of Max. / Min. Inputs and Outputs;
• IP67 Waterproof ECU – ideal for off-roading.

The main benefits of purchasing this ECU:

1. Full technical support available via telephone and e-mail – at additional cost;
2. Increased performance;
3. Increased part throttle economy;
4. Greatly improved drive-ability – better throttle response, smoother running, etc;
5. Improved reliability;
6. Switchable maps – ideal for LPG conversions.