Canems Fully Sequential Programmable ECU

New Canems Fully Sequential ECU, 2m pigtail loom with 55-pin Motronic connector, USB adaptor, RS232 programming cable and software for fully mappable fuel and ignition. Can be used with practically all petrol engines.

This kit includes:

  • Canems ECU – complete with base map for your engine;
  • Canems ECU 55-pin Motronic connector pre-connected to 2 metres of colour coded thin wall cable;
  • USB Adaptor Cable;
  • RS232 Programming Cable;
  • Software CD;
  • Instruction Manual.

Features:

  • Semi-Sequential Fuel Injection for up to 16 cylinders or Fully-Sequential Fuel Injection for up to 8 Cylinders;
  • Wasted Spark Ignition for up to 16 Cylinders or Direct (coil-on-plug) Ignition for up to 8 cylinders;
  • 2 Wide-band or Narrow-band Lambda Inputs – with Closed Loop Control and 3D Target Air-Fuel Ratio map;
  • Two Switchable 3D Fuel Injection Maps with 252 programmable sites;
  • Two Switchable 3D Ignition Timing Maps with 252 programmable sites;
  • Built-in Coil Control (no external modules required – e.g.: EDIS);
  • 3D Injection Advance Map with 252 programmable sites;
  • 12000rpm capability;
  • Programmable Hard and Soft Rev Limiters;
  • Programmable Shift Light output, Cooling Fan control, etc;
  • Programmable Correction Maps for Coolant Temperature, Air Temperature and Cranking;
  • Programmable Transient Enrichments;
  • Staged Injector Control;
  • 3D PWM Output – with 252 programmable sites – ideal for open-loop Boost Control;
  • PWM valve, Stepper Motor (bi-polar) and/or Spark Scatter Idle control;
  • Closed Loop Idle control;
  • All settings Real-Time Programmable;
  • Adjustable Coil Dwell Control;
  • MAP or TPS based Load Sensors can be utilised;
  • RPM input from either VR or Hall Effect Sensor with 36-1 or 60-2 toothed wheel – please state when ordering;
  • Data-logging of up to 24 optional parameters, with adjustable recording rate and 2GB internal memory;
  • Immobilisor input;
  • Diagnostic Recording of Max. / Min. Inputs and Outputs.

The main benefits of purchasing this ECU:

  1. Full technical support available via telephone and e-mail;
  2. Increased performance;
  3. Increased part throttle economy;
  4. Greatly improved drive-ability – better throttle response, smoother running, etc;
  5. Improved reliability;
  6. Future-proof – internal hardware present for 4-wheel traction control, 2 knock sensors, fly-by-wire throttle, Canbus, etc;
  7. Switchable maps – ideal for LPG conversions.
Canems Fully Sequential Programmable ECU
£954
£795 Ex VAT